Hydraulic Cone Crusher

This hydraulic cone crusher was a new optimized designed product based on advanced concepts. It is with excellent crushing frequency  eccentricity, the crushed materials which are less than the closed side can go up to 80%, which significantly increase the processing capability of the subsequent step. The application of laminating crushing theory greatly improves the shape the crushed particles.

With the application of full hydraulic system, this hydraulic cone crusher features high automatization, it is easy to operate  maintain; it also has the advantages of strong crushing force, high efficiency  large capacity like normal cone crusher.

This cone crusher machine is used to crush materials with medium hardness  above, such as iron ore, limestone, copper ore, quartz, granite, sandstone, etc. in the mining, metallurgical, construction, chemical  silicate industry.

特點與適用范圍

HD高效液壓圓錐破碎機采用了先進設計理念，經優先設計而成的新型圓錐破碎機，采用了較佳的破碎頻率和偏心距，小于閉邊排料□的粒級含量可達80%,顯著的提高了后續工序的處理能力，降低了溶合消耗。液壓理 論的應用改善了產品粒形。全液壓系統的應用，操作、維護簡單、方便、省時、省力。

Character  Application Range

HD serise hydrulic pressure cone crusher is made based on advanced technology, optimized desing. It adopsts perfect crushing frequency  eccentric distance, which greatly improves the following process capacity  the products snaller than discharge opening can reach 80%  reduce cost. With the application of hydraulic pressure, the products can be of high automatization, which greatly save time  labour, easy to operation  maintenance.

注：1、表中處理能力與給料粒度、破碎腔型、物料密度、物料清潔度、水份含量等因素有關。。

2、最小排料口指不引起支承跳動所能實現的最小排料口，這與物料有關，這個排料口是可變的。

3、處理能力等參數是指開路流程條件下，物料抗壓強度為140-150Mpa,水份不大于4%,給料均勻，過 大粒度和過小粒度均不大于10%,電機負荷在滿載的85%-90%時。

Notes:

1 .The processing capacity is suject to the type of crushing cavity, size,character,purity  moisture of raw materials.

2.The minimum discharging opening means the minimum opening which the supporter can bear  the discharging opening is adjustable.

3.The technical parameters above are on the basis of standard working condition, with the materials' conpressive strength 140-150Mpa, moisture less than 4%,feeding evenly with escessive large  small materials less than 10% respectively,  with the charge of motor during 85%-90% of full loaded.

技術參數/Technical Parameter